| OUR COMPRESSORS |
|
| |
|
| |
|
| |
| CONTACT INFO: |
 |
No.5 Jalan Anggerik Mokara 31/44,
Seksyen 31, Kota Kemuning,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia |
| |
Tel: +603-5122 2669
Fax: +603-5122 3669 |
|
| Website: www.airmatic.com.my |
| |
|
| |
| |
| |
| |
|
 |
| |
| |
| Pages 2 of 3 1 2 3 |
 |
|
|
 |
| IHI Compressors: Features and Benefits |
|
| |
 |
| Smaller is better |
|
| With a simple, compact design, IHI turbo compressors handle the same volume as conventional packaged compressors, but with a 30-60% reduction in size. This also ensures easier installation. |
|
| |
|
 |
| Suction Control Valve (Inlet Guide Vane) |
|
The Inlet Guide Vane (IGV), which deflects air flow to the compressor in the same direction as impeller rotation, gives the compressors higher efficiency in partially loaded operation than that achieved by an inlet butterfly valve.
* Available on models in the 140kW+ range |
|
| |
|
 |
| Air Coolers (Inter coolers & aftercoolers) |
|
| Annual cleaning of coolers is recommended to ensure stable operation. Because of their elegant construction, this is very easy to do in the case of our models. All you have to do is brush the inner surfaced of the tubes *Copper fin and copper tube |
|
| |
 |
| Microprocessor Control Panel |
|
| *Available on models in the 140kW+ range |
 |
Operating Conditions |
| |
For ease of daily monitoring, key measurements, data and operating conditions can be checked via the control panel's easy-to-read graphics. |
|
Trend Graph |
| |
The control panel provides a graphical interface that allows operators monitor key trends (discharge air pressure, motor current and shaft vibration), helping them to keep on top of operation conditions and plan maintenance routines. |
|
Recall Data |
| |
Recalls necessary operating data at the time of the last five shutdowns, alarms and last three starts / stops. |
|
Causes & Countermeasures |
| |
In the event the alarm has been tripped, causes and possible countermeasures can be checked on screen, providing operators with clear guidance. |
|
|
| |
|
 |
| Auto-Dual Control |
|
As the air demand fluctuates, the IGV controls airflow to maintain constant discharge pressure (constant pressure control) . In the event that air demand decreases further, compressor repeats load/unload operation between two preset pressure points (load/unload control). Combining the advantages of two systems, our control system provides both energy savings and surge protection.
*Available on models in the 140kW+ range. |
|
|
|
| |
| Pages 2 of 3 1 2 3 |
|
|
|
|
|
|
